If the locks do cycle automatically then proceed to step 10. Remove key from ignition, open drivers door and return to step 1 ). ( If locks do not cycle after you let go, not before you let go of the unlock button, then the vehicle has not entered programming mode and you must start procedure over. The vehicle should respond by door locks locking and unlocking automatically.
Release the power UNLOCK button on the door panel. Turn the ignition to the ON position (as far as you can go without starting the engine.) 8. The manuals are readily available online which tell you which menu does what, just make sure you are looking up the manual for your exact. The process is similar for other DEI products such as Viper, Avital, Python, etc. CHECKMATE COMMANDER remote KEYLESS starter ELV777K FOB. Turn the ignition to the OFF position.Īfter giving my car a through interior spring clean, the red security light.
Turn the ignition to the ON position (as far as you can go without starting the engine.) 6. Perform steps 5 through 8 in a fairly rapid succession. Hold down the power UNLOCK button on the driver's door panel, continue to hold down until instructed to release in step 9.
0 kommentar(er)
